35-704600-005

Du bist hier: › 35-704600-005
Robertshaw part number 35-704600-005

35-704600-005

Die Fenwal-Direktzündungsregler der Serie 35 arbeiten mit einem Mikroprozessor, der den ordnungsgemäßen Betrieb des Gasbrenners kontinuierlich analysiert und steuert. Die Mikroprozessorschaltung sorgt für präzise, wiederholbare Zeitabläufe für Zünd- und Spülzeiten, eine automatische Rückstellung nach einer Stunde und Flammenüberwachung während der Vorspülung. Die Serie 35 verfügt über eine integrierte Diagnosefunktion mit LED-Ausgang zur Unterstützung bei der Fehlersuche und zur Gewährleistung eines sicheren und effizienten Brennerbetriebs.

712-016

The Robertshaw® 712 Series Intermittent Pilot Ignition System Kit features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Caution: Do not use on LP gas applications.

780-746

The Robertshaw® 780 Series Pilot Controls feature flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. When the thermostat calls for heat, the 780 series control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established. The Robertshaw 780-845 lockout ignition control provides 90 seconds of spark, followed by a six minute time delay (purge) between ignition attempts. If the pilot flame is not sensed after three tries, the control goes into a one-hour lockout period. At the end of the lockout period, if the demand for heat is still present, the unit will repeat the three tries for ignition.

780U-IP10

These 24V modules are highly configurable and replace over 700 part numbers, which simplifies inventory management. They come with up to 32 preloaded configurations, making installation easy. These modules are optimized for gas furnaces, water heaters, commercial cooking equipment, and unit heaters, ensuring seamless operation across a variety of replacement models.
Robertshaw part number 780-502

780-502

Robertshaw part number 35-705601-001

35-705601-001

Die Fenwal-Direktzündungsregler der Serie 35 arbeiten mit einem Mikroprozessor, der den ordnungsgemäßen Betrieb des Gasbrenners kontinuierlich analysiert und steuert. Die Mikroprozessorschaltung sorgt für präzise, wiederholbare Zeitabläufe für Zünd- und Spülzeiten, eine automatische Rückstellung nach einer Stunde und Flammenüberwachung während der Vorspülung. Die Serie 35 verfügt über eine integrierte Diagnosefunktion mit LED-Ausgang zur Unterstützung bei der Fehlersuche und zur Gewährleistung eines sicheren und effizienten Brennerbetriebs.

712-017

The Robertshaw® 712 Series Intermittent Pilot Ignition System Kit features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Caution: Do not use on LP gas applications.

785-001

The Robertshaw® 785 Series Automatic Pilot Relight Kits are designed for use on rooftop heating equipment, water heaters, boilers, space heaters, unit heaters, dryers, and other commercial, industrial, and residential appliances where the problem of pilot outage may occur. It should only be applied to those systems which already incorporate the necessary pilot-safety control system.

712-019

The Robertshaw® 712 Series Intermittent Pilot Ignition System Kit features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Caution: Do not use on LP gas applications.
Nach oben scrollen