EA5-8-36-1U

You are here: › EA5-8-36-1U

EA5-8-36-1U

Temperature control for ovens, fryers, sterilizers, water or oil heating tanks, etc. used for heavy-duty service. Responsible for controlling the electric resistor; activation and deactivation in accordance with the reading by the oil capillary bulb. "EA" for basic version with Bakelite thermostat; "EX" for the special polyester version.

1819-001

The Robertshaw® 1800 Pilot Series quick dropout pilot assembly is designed for those applications (usually LP Gas) that require a quick dropout of the safety magnet when pilot flame is lost.

1830-712

The 1830-700 Series Pilot Uni-Kits ® are designed for use with the OEM-style Pilot Ignition systems. The electrode is permanently riveted to the pilot frame and the spark gap is fixed at 1/8 . These pilots can be used to replace existing pilot assemblies or for retrofitting standing pilot applications when an exact replacement is desired. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. Pilot tubing size is 1/4".

1830-004

The 1830 Series Pilot Uni-Kit ® models are designed to be used with all Robertshaw® and most competitive thermocouples. Uni-Kit models include an adaptor that converts a threaded thermocouple/thermopile model 2CH to a snap-in thermocouple type, model 2C.

1820-009

The Robertshaw® 1820 Series Pilot Uni-Kit ® models are designed to replace hard-to-find ITT-General PG9 type pilots. A special 1/4 tubing adaptor is typically provided with nut and ball sleeve. Uni-Kits are available with and without a 32 (810mm) thermopile.

1830-716

The 1830-700 Series Pilot Uni-Kits ® are designed for use with the OEM-style Pilot Ignition systems. The electrode is permanently riveted to the pilot frame and the spark gap is fixed at 1/8 . These pilots can be used to replace existing pilot assemblies or for retrofitting standing pilot applications when an exact replacement is desired. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. Pilot tubing size is 1/4".

1830-718

The 1830-700 Series Pilot Uni-Kits ® are designed for use with the OEM-style Pilot Ignition systems. The electrode is permanently riveted to the pilot frame and the spark gap is fixed at 1/8 . These pilots can be used to replace existing pilot assemblies or for retrofitting standing pilot applications when an exact replacement is desired. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. Pilot tubing size is 1/4".

1820-019

The Robertshaw® 1820 Series Pilot Uni-Kit ® models are designed to replace hard-to-find ITT-General PG9 type pilots. A special 1/4 tubing adaptor is typically provided with nut and ball sleeve. Uni-Kits are available with and without a 32 (810mm) thermopile.

1830-722

The 1830-700 Series Pilot Uni-Kits ® are designed for use with the OEM-style Pilot Ignition systems. The electrode is permanently riveted to the pilot frame and the spark gap is fixed at 1/8 . These pilots can be used to replace existing pilot assemblies or for retrofitting standing pilot applications when an exact replacement is desired. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. Pilot tubing size is 1/4".
Scroll to top