780-001

You are here: › 780-001

780-001

The Robertshaw® Universal Ignition Control Uni-Kit® is available in both nonlockout (780-001) and lockout (780-002). The 780-003 is lockout with a prepurge function. The kit a flame sense circuit that automatically detects the presence of a remote sense probe (2 rod system) or it switches to local sense (1 rod system) utilizing the pilot assembly as a sensing source. If both systems are provided, failure of one causes automatic reversion to the other.

780-002

The Robertshaw® Universal Ignition Control Uni-Kit® is available in both nonlockout (780-001) and lockout (780-002). The 780-003 is lockout with a prepurge function. The kit a flame sense circuit that automatically detects the presence of a remote sense probe (2 rod system) or it switches to local sense (1 rod system) utilizing the pilot assembly as a sensing source. If both systems are provided, failure of one causes automatic reversion to the other.

780-787

The Robertshaw® 780 Series Hot Surface Controls are designed for use on gas fired systems. The system acts on a demand for heat by a switch or thermostat to supply power to the ignition control. On non pre-purge models, the ignitor will be energized immediately and remain on for either of two optional selected ignitor heat-up times: approximately 17 or 34 seconds. For models with the prepurge option, there is a time delay equal to the heat-up time selected before the ignitor is energized. At the end of the ignitor heat-up time, the gas valve is opened supplying gas to the main burner. After several seconds, the ignitor is turned off and the sensor is energized. As long as flame is sensed, the system continues to operate.

1830-002

The 1830 Series Pilot Uni-Kit ® models are designed to be used with all Robertshaw® and most competitive thermocouples. Uni-Kit models include an adaptor that converts a threaded thermocouple/thermopile model 2CH to a snap-in thermocouple type, model 2C.

EA5-7-36U

Temperature control for ovens, fryers, sterilizers, water or oil heating tanks, etc. used for heavy-duty service. Responsible for controlling the electric resistor; activation and deactivation in accordance with the reading by the oil capillary bulb. "EA" for basic version with Bakelite thermostat; "EX" for the special polyester version.

1830-711

The 1830-700 Series Pilot Uni-Kits ® are designed for use with the OEM-style Pilot Ignition systems. The electrode is permanently riveted to the pilot frame and the spark gap is fixed at 1/8 . These pilots can be used to replace existing pilot assemblies or for retrofitting standing pilot applications when an exact replacement is desired. Each Uni-Kit comes with a natural gas orifice installed and a separate L.P. gas orifice. Pilot tubing size is 1/4".

1830-003

The 1830 Series Pilot Uni-Kit ® models are designed to be used with all Robertshaw® and most competitive thermocouples. Uni-Kit models include an adaptor that converts a threaded thermocouple/thermopile model 2CH to a snap-in thermocouple type, model 2C.

EA5-8-36-1U

Temperature control for ovens, fryers, sterilizers, water or oil heating tanks, etc. used for heavy-duty service. Responsible for controlling the electric resistor; activation and deactivation in accordance with the reading by the oil capillary bulb. "EA" for basic version with Bakelite thermostat; "EX" for the special polyester version.

1819-001

The Robertshaw® 1800 Pilot Series quick dropout pilot assembly is designed for those applications (usually LP Gas) that require a quick dropout of the safety magnet when pilot flame is lost.
Scroll to top