What's New - Page 182 of 205

710-509

The Robertshaw® 710 Series Low Capacity Gas Valves feature an extremely compact control designed for low capacity and limited space applications. Features include three-position outlets, multi-positional capability and component replaceability.

720-474

The Robertshaw^® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit^® models are factory set at 3.5 WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16 swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.

705-501

The 705 Series millivolt operator kit is designed to allow field conversion of 700 and 710 Series manual gas valves to wall thermostat control. These operators are also replacements for specific 700-500 Series gas valves. Operator kits are available with and without a pressure regulator installed (see ordering chart). Each operator kit includes a gasket and screws for a complete installation. WARNING: Do not use on 700-800 Series Bleed Gas Controllers (7000GO). Valve will not function properly and an unsafe condition will exist. NOTE: Always use a new gasket and mounting screws when replacing the valve operator.

720-050

The Robertshaw® 720 Series Lever Actuated Gas Valves are designed for intermittent pilot ignition applications. This series incorporates a manual valve, pilot valve, dual automatic valves (2), and a main gas pressure regulator. Uni-Kit ® models are factory set at 3.5 WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The 720 Series is designed for many residential applications such as central heating units, space heaters, wall heaters, boilers, and mobile home furnaces. This valve has a compact swing radius of only 3-9/16 to enable it to fit a wide range of OEM replacement applications.

705-502

The 705 Series millivolt operator kit is designed to allow field conversion of 700 and 710 Series manual gas valves to wall thermostat control. These operators are also replacements for specific 700-500 Series gas valves. Operator kits are available with and without a pressure regulator installed (see ordering chart). Each operator kit includes a gasket and screws for a complete installation. WARNING: Do not use on 700-800 Series Bleed Gas Controllers (7000GO). Valve will not function properly and an unsafe condition will exist. NOTE: Always use a new gasket and mounting screws when replacing the valve operator.

720-051

The Robertshaw® 720 Series Lever Actuated Gas Valves are designed for intermittent pilot ignition applications. This series incorporates a manual valve, pilot valve, dual automatic valves (2), and a main gas pressure regulator. Uni-Kit ® models are factory set at 3.5 WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The 720 Series is designed for many residential applications such as central heating units, space heaters, wall heaters, boilers, and mobile home furnaces. This valve has a compact swing radius of only 3-9/16 to enable it to fit a wide range of OEM replacement applications.

710-511

The Robertshaw® 710 Series Low Capacity Gas Valves feature an extremely compact control designed for low capacity and limited space applications. Features include three-position outlets, multi-positional capability and component replaceability.

720-054

The Robertshaw® 720 Series Lever Actuated Gas Valves are designed for intermittent pilot ignition applications. This series incorporates a manual valve, pilot valve, dual automatic valves (2), and a main gas pressure regulator. Uni-Kit ® models are factory set at 3.5 WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The 720 Series is designed for many residential applications such as central heating units, space heaters, wall heaters, boilers, and mobile home furnaces. This valve has a compact swing radius of only 3-9/16 to enable it to fit a wide range of OEM replacement applications.

720-055

The Robertshaw® 720 Series Lever Actuated Gas Valves are designed for intermittent pilot ignition applications. This series incorporates a manual valve, pilot valve, dual automatic valves (2), and a main gas pressure regulator. Uni-Kit ® models are factory set at 3.5 WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The 720 Series is designed for many residential applications such as central heating units, space heaters, wall heaters, boilers, and mobile home furnaces. This valve has a compact swing radius of only 3-9/16 to enable it to fit a wide range of OEM replacement applications.

710-509

How can we help you?