5225-047

You are here: › 5225-047

5225-047

The Robertshaw® 5225 Series Limit Control is designed for any appliance where temperature protection is needed. All 5225 Series controls are non-adjustable, factory calibrated, and feature negative biased power element diaphragms. The 5225 Series is a proven safety control for commercial and specialty applications. They are available in automatic or manual reset versions with temperature settings from 425 °F to 600 °F (218 °C to 316 °C).

5210-248

The Robertshaw® 5210 Series Electric Thermostat is a direct acting, single pole, slow make and break type thermostat. Typical applications are for incubators, laboratory ovens, water baths, sterilizers, dishwashers, steam tables, scalding tanks and other equipment where a close temperature differential is required.

A30-2311

The A30-2311 control is designed to be wired in series with the cycling control. The capillary senses the evaporator temperature, as ice starts to accumulate on the evaporator. The control will shut off the compressor. The contacts open at 30 °F and stop the compressor. When the evaporator temperature reaches 60 °F the contacts close and restart the unit. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to http://www.p65warnings.ca.gov/

5225-054

The Robertshaw® 5225 Series Limit Control is designed for any appliance where temperature protection is needed. All 5225 Series controls are non-adjustable, factory calibrated, and feature negative biased power element diaphragms. The 5225 Series is a proven safety control for commercial and specialty applications. They are available in automatic or manual reset versions with temperature settings from 425 °F to 600 °F (218 °C to 316 °C).

5000-811

The Robertshaw® 5000 Series Electric Thermostat is a heavy-duty thermostat designed for use in harsh applications where precise temperature control is required. The control uses a double pole single throw (DPST) snap-action mechanism with a positive OFF switch. It is recommended for use on applications that require double pole operation and accurate temperature control.
Robertshaw part number 275-3180-00

275-3180-00

The Robertshaw 275 Series Electric Gas Thermostats were designed for use in conventional ovens in combination with the ignition system. Their compact design fits even in confined areas. Each of these thermostats is a highly reliable temperature control with a long operating life. The switch uses a patented push-to-turn function to activate the range valve or close the switch contacts. Turning on the thermostat activates the silicon carbide ignition bar. When this block reaches the correct temperature, it opens the gas valve and ignites the gas. Shaft rotation is counterclockwise to increase temperature and there is a detent on the frame to provide a positive off.

5210-363

The Robertshaw® 5210 Series Electric Thermostat is a direct acting, single pole, slow make and break type thermostat. Typical applications are for incubators, laboratory ovens, water baths, sterilizers, dishwashers, steam tables, scalding tanks and other equipment where a close temperature differential is required.

5225-059

The Robertshaw® 5225 Series Limit Control is designed for any appliance where temperature protection is needed. All 5225 Series controls are non-adjustable, factory calibrated, and feature negative biased power element diaphragms. The 5225 Series is a proven safety control for commercial and specialty applications. They are available in automatic or manual reset versions with temperature settings from 425 °F to 600 °F (218 °C to 316 °C).

5225-064

The Robertshaw® 5225 Series Limit Control is designed for any appliance where temperature protection is needed. All 5225 Series controls are non-adjustable, factory calibrated, and feature negative biased power element diaphragms. The 5225 Series is a proven safety control for commercial and specialty applications. They are available in automatic or manual reset versions with temperature settings from 425 °F to 600 °F (218 °C to 316 °C).
Scroll to top