Gas Valves

The Robertshaw® 700 Series Millivolt Gas Valves are wall  thermostat actuated combination controls which provide installation flexibility from furnaces to swimming pool  applications. The complete line of 700-500 millivolt gas  valves offers a wide range of replacements from small capacity 3/8 pipe to high capacity 1 pipe up to 720,000  BTU usage.

The Robertshaw® 700 Series Snap-Throttle Hydraulic Combination Gas Valves are thermostatically operated by a remote temperature sensing bulb. Models are available  with single capillary or remote dial-in snap-action and snap-throttle types. Valves can be mounted in any position except upside down.

The Robertshaw® 700 Series 24 Volt Combination Gas Valves offer replacement flexibility. With capacities ranging to 720,000 BTU, three-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 Volt Uni-Kit ® models are suitable for either natural or LP gas. The valve is factory set at 3.5 WC natural gas. A regulator cover plate is included to convert to LP gas.

The Robertshaw® 700 Series 2-Stage 24 Volt Gas Valves - standing pilot as well as intermittent pilot models - feature reliability, performance, flexibility and easy installation all in one compact control. These valves feature a manual valve (gas cock), inlet/outlet screens, pilot gas filter, and pilot adjustment key. Models have a slotted automatic pilot safety magnet to provide gas shut-off in case of a pilot outage.

The Robertshaw^® 700 Series Line Voltage Gas Valves offer the same replacement flexibility as the 24 Volt combination controls. Line Voltage models are available in 120 and 240 Volts AC. Features include three-position outlets, multi-positional capability and capacities ranging up to 720,000 BTU.

110 series water heating gas valve accessories.

The Robertshaw® 700 Series Universal Gas Valves are  designed for intermittent pilot ignition applications. These universal models include all the necessary parts to adapt  the valves to direct spark or hot surface applications. Each  valve incorporates a manual valve, pilot valve, and a main gas pressure regulator (optional by model). These valves are  designed for many residential and commercial applications such as central heating units, wall heaters, boilers and  mobile home furnaces.

The Robertshaw® 710 Series Low Capacity Gas Valves feature an extremely compact control designed for low capacity and limited space applications. Features include three-position outlets, multi-positional capability and component replaceability.

The Robertshaw® 705 Series Gas Valves are the industry  standard with capacity ranges from 5,000 to 1,150,000 BTU. Several actuator types are available depending upon the  application such as 24 Volts, Line Voltage, Millivolt  and Hydraulic.

The Robertshaw^® 720 Series 24 Volt Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator,  and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit^® models are factory set at 3.5 WC for natural gas, but can be converted to LP by installing  the regulator conversion kit included. The wiring connections, manual selector and adjustments  are easily accessible on top of the valve. With a 3-9/16 swing radius, the 720 Series lends itself well to replacing  many OEM valves. Valve can be mounted in any position  except upside down.

The 705 Series millivolt operator kit is designed to allow field conversion of 700 and 710 Series manual gas valves to wall thermostat control. These operators are also replacements for specific 700-500 Series gas valves. Operator kits are available with and without a pressure regulator installed (see ordering chart). Each operator kit includes a gasket and screws for a complete installation. WARNING: Do not use on 700-800 Series Bleed Gas Controllers (7000GO). Valve will not function properly and an unsafe condition will exist. NOTE: Always use a new gasket and mounting screws when replacing the valve operator.

The Robertshaw® 720 Series Lever Actuated Gas Valves are designed for intermittent pilot ignition applications. This series incorporates a manual valve, pilot valve, dual automatic valves  (2), and a main gas pressure regulator. Uni-Kit ® models are factory set at 3.5 WC for natural gas, but can be converted  to LP by installing the regulator conversion kit included. The  720 Series is designed for many residential applications such as central heating units, space heaters, wall heaters, boilers,  and mobile home furnaces. This valve has a compact swing radius of only 3-9/16 to enable it to fit a wide range of OEM  replacement applications.

The Robertshaw® 1720 Series Thermomagnetic Safety Valve is a control used to cut off the flow of gas to the burner in the event of a pilot outage. The magnet assembly is energized by voltage generated by a thermocouple that is heated by the pilot flame. When this flame is extinguished, the thermocouple voltage decreases until a spring overcomes the magnetic force and closes off both the pilot and main gas. This control can be used for commercial and residential ovens, infrared heaters, chicken and pig brooders, recreational vehicle gas appliances and many more applications requiring automatic safety valves.

The Robertshaw Dual Series Gas Valves are thermal bimetal gas control valves designed for efficient use in gas cooking appliances of various types. Valves with dual outlets are used usually in self-cleaning ovens.

High limit lead wire assembly fits into slotted magnet on gas valves to allow hookup with an external ECO (energy cut-off) switch.

Shank Extension increases length of 1-1/4" and 1-3/8" shank models to approximately 3".

The 1710 Series Replacement Body is used with the 1720 Series Replacement Magnet Heads in TS Automatic Safety Valve applications. Note arrows showing direction of gas flow. IMPORTANT NOTICE: When a new 1710 replacement body is ordered a new 1720 safety magnet must also be used. Order separately, see Magnet Heads.

The Robertshaw® Single Series Gas Valves are thermal bimetal gas control valves designed for efficient use in residential gas cooking appliances of various types. Valves with single outlets are used in conventional gas ovens.

The Robertshaw® 4075 Series Gas Solenoid is designed to control the flow of gas in cooking appliances. Both single FJT and dual FJTDO models are available for a wide variety of applications such as ovens, griddles and fryers.

The Robertshaw® 8500 Gas Valve Kit Series is designed for light commercial and residential applications with direct ignition (DSI) and hot surface ignition (HSI) systems such as furnaces, central heating units, space heaters, wall heaters, and mobile home furnaces. Setting this valve apart from the competition is its excellent regulation control, compact size and ON/OFF electrical switch.

The Robertshaw 710-296 Millivolt Kit includes a low profile millivolt actuated gas valve (710-502), a pilot generator kit (1820-009) and an easy-to-use mechanical wall thermostat (9204V).