Ersatzteile
' ' Steuerung der Zündung

Steuerung der Zündung

Alle Teile anzeigen für Steuerung der Zündung
28 Series

10-600 Series Electronic Fan Controls

Industrie: Heizung

The 10-660 fusible link repair kit is identical to Carrier/BDP part number HY660001. The 10-660 also replaces Carrier part number P421-1010 and 307566-701. Specifications Replaces HY660001.
Robertshaw part number 10-660

35 Series Direct Spark Controls

Branchen: Kochen, Heizung

The Fenwal 35 Series Direct Spark Ignition Controls utilize a microprocessor to continually analyze and control the proper operation of the gas burner. The microprocessor circuit design provides precise, repeatable timing sequences for ignition times and purge times, one hour automatic reset and flame sensing during pre-purge. The 35 Series includes on-board diagnostics with LED output to provide assistance with troubleshooting, and to ensure safe and efficient burner operation.
Robertshaw part number 35-630501-001

35 Series Hot Surface Controls

Branchen: Kochen, Heizung

The Fenwal 35 Series Hot Surface Controls are designed to perform many gas-fired 24V AC appliance functions in a single control, resulting in lower system costs. This series monitors the demand for heat, ignites and maintains the flame during heating, and provides diagnostic support. The on-board diagnostics with LED output provide assistance with troubleshooting and ensures safe and efficient burner operation. The microprocessor circuit design provides precise, repeatable timing sequences for ignition and pre-purge and inter-purge times, as well as multiple tries for ignition.
Robertshaw part number 35-655800-003

620 Series Transformers

Industrie: Heizung

The Robertshaw® 620 Series Transformers are available in a wide variety of models from universal enclosed to single voltage open frame models. UL approved 1411. Meets applicable NEMA standards. Thermal fuse protection. UL File No. E92807 UPC:  662013639693
Robertshaw part number 620-502

35 Series Pilot Controls

Branchen: Kochen, Heizung

The Fenwal 35 Series Pilot Controls are a 24V AC intermittent pilot ignition control. The microprocessor circuit design provides precise, repeatable timing and operating sequences. The on-board diagnostics with LED output provide assistance with troubleshooting to ensure safe and efficient operation.
Robertshaw part number 35-630907-017

680 Series Flame Sensors

Industrie: Heizung

Enhance the performance and safety of your HVAC system with the Robertshaw® Direct Replacement Flame Sensor

780 Series Hot Surface Controls

Industrie: Heizung

The Robertshaw® 780 Series Hot Surface Controls are designed for use on gas fired systems. The system acts on a demand for heat by a switch or thermostat to supply power to the ignition control. On non pre-purge models, the ignitor will be energized immediately and remain on for either of two optional selected ignitor heat-up times: approximately 17 or 34 seconds. For models with the prepurge option, there is a time delay equal to the heat-up time selected before the ignitor is energized. At the end of the ignitor heat-up time, the gas valve is opened supplying gas to the main burner. After several seconds, the ignitor is turned off and the sensor is energized. As long as flame is sensed, the system continues to operate.

780 Series Universal Ignition Controls

Industrie: Heizung

The Robertshaw® Universal Ignition Control Uni-Kit® is available in both nonlockout (780-001) and lockout (780-002). The 780-003 is lockout with a prepurge function. The kit a flame sense circuit that automatically detects the presence of a remote sense probe (2 rod system) or it switches to local sense (1 rod system) utilizing the pilot assembly as a sensing source. If both systems are provided, failure of one causes automatic reversion to the other.

780 Series Ignition Controls

Industrie: Heizung

The Robertshaw® 780 Series Direct Spark Controls are applicable to commercial cooking equipment, gas fired heating, and water heating systems of many types. The system acts on a demand for heat by a switch or thermostat to open the gas valve. At the same time, the 780 series ignition control supplies a spark to the electrode which ignites the gas. After the gas is lit, an electronic circuit proves the presence of flame using flame rectification. When the thermostat is satisfied, the gas valve will be closed to shut off the main burner gas.
Robertshaw part number 780-502

780U Series Universal Direct Spark Modules

Industrie: Heizung

The Robertshaw 780U-DS20 Universal Direct Spark Ignition Module, part of the 780U Universal Series, is a versatile 24V ignition module designed for gas furnaces, boilers, water heaters, and commercial cooking equipment. It offers customizable settings for trials, pre-purge, trial for ignition, inter-purge, and restart time, ensuring optimal performance across various applications. This module is compatible with both natural and LP gas, and supports both single rod (local sense) and two rod (remote sense) flame sensing. It can replace over 150 models, including those from Honeywell, White-Rodgers, and Fenwal. The 780U-DS20 also includes a vent damper connection and LED indicators to display flame presence, strength, and system status or errors. Applications include Gas furnaces, boilers, water heaters and commercial cooking. Configurable 24V ignition module Selectable number of trials, pre-purge, trial for ignition, inter-purge and restart time. Replaces over 150 models including Honeywell, White-Rodgers, Johnson Controls and others. Flame sensing supports both single rod (local sense) and two rod (remote sense). Compatible with both Natural and LP gas Vent damper connection allows for connection to a vent damper LED indicators provide troubleshooting and notifications for flame presence/strength and displays system status and errors

780U Series Universal Hot Surface Ignition Modules

Industrie: Heizung

The Robertshaw 780U-HS30 Universal Hot Surface Ignition Module, is a highly adaptable 24V ignition module ideal for gas furnaces, boilers, water heaters, and unit heaters. It offers configurable settings for the number of trials, pre-purge, trial for ignition, inter-purge, and restart time. This module can replace over 100 models, including those from Honeywell, White-Rodgers, Fenwal and more. Designed for 120VAC timed warmup hot surface ignition elements (up to 5A), it supports both single rod (local sense) and two rod (remote sense) flame sensing and is compatible with both natural and LP gas. The module also features LED indicators that provide clear information on flame presence, strength, system status, and errors. Applications include Gas furnaces, boilers, water heaters and commercial cooking. Configurable 24V ignition module. Selectable number of trials, pre-purge, trial for ignition, inter-purge and restart time. Replaces over 100 models, including Honeywell, White-Rodgers, Fenwal and more 120 VAC (up to 5A) timed warmup hot surface ignition elements. Flame sensing supports both single rod (local sense) and two rod (remote sense). Compatible with both Natural and LP gasLED indicators provide troubleshooting and notifications for flame presence/strength and displays system status and errors

780 Series Direct Spark Controls

Robertshaw part number 780-502

35-J Series Direct Spark Ignition Controls

Industrie: Kochen

The Fenwal 35-J Series Direct Spark Ignition provides all the features, performance, and reliability of our 35-60 Series 24 VAC Direct Spark Ignition control in a Johnson Controls format. Designed to directly replace the Johnson G76x Series, the Fenwal 35-J matches the footprint, mounting hole pattern, and wiring connections of the discontinued Johnson series.
Robertshaw part number 35-605606-111

760 Flame Sensor Series

Industrie: Heizung

The Robertshaw® Flame Sensor Assembly and Replacement Sensors have high temperature Kanthol sensor rods that will withstand 1800 °F (982 °C). The sensor rod is 4" long and can be cut and bent to match an original unit. Excellent replacement for most manufacturers' flame sensors.
Robertshaw part number 10-760

790 Series Ignition Controls

Industrie: Heizung

The RAM intermittent ignition controls are 24 and 120 VAC. When the thermostat calls for heat, RAM's IID Control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established. Specifications Electrical Rating (input): 24V 50/60 Hz, 120V 50/60 Hz, 50 mA.Flame Sensor Current: 0.7 mA.Gas Valve Relay Ratings: 5.0 Amps. Temperature Range: -40 °F to 175 °F.Approvals: AGA, CGA.

Thermocouple Adaptor Series

Industrie: Heizung

The 1922-001 adaptor allows the high limit switch to be connected into the thermocouple circuit on valves without the slotted magnet.

Dryer Ignitors Series

Industrie: Wäscherei

The Robertshaw® Dryer Ignitor Kit
Robertshaw part number 41-311

Heating Sensor Series

Industrie: Heizung

The Robertshaw® Flame Sensor Assembly and Replacement Sensors have high temperature Kanthol sensor rods that will withstand 1800 °F (982 °C). The sensor rod is 4 long and can be cut and bent to match an original unit. Excellent replacement for most manufacturers' flame sensors.
Robertshaw part number 10-227

Hot Surface Furnace Ignitors Series

Industrie: Heizung

The Robertshaw® Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment.
Robertshaw part number 41-401

RAM 4 Series Intermittent Pilot Ignition Control

Branchen: Kochen, Heizung

The RAM 4 Series Intermittent Pilot Ignition Control is designed to initiate sparking and open the pilot valve portion of the gas valve when the thermostat calls for heat. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. The pilot burner flame is monitored continuously at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, RAM's IID Control simultaneously will shut off the main valve until the pilot is established.
RAM 4 Series

Spark Plug Adaptor Series

Industrie: Heizung

Spark plug to 1/4" female quick-connect.
Robertshaw part number 10-391

Spark Module Series

Industrie: Kochen

The Robertshaw® Spark Module Series are Oven Spark Ignition Modules designed for oven re-ignition. A spark is generated for as long as the appropriate input terminal is energized.  

Electronic Ignition Module Series

Industrie: Kochen

The Robertshaw® Electronic Ignition Modules are designed to enable the lighting of oven, range and stove gas burners.  The component works with alternating current (AC) and the internal circuit generates a series of sparks to ignite the gas. The plastic material used in the structure and internal parts is self-extinguishing, thereby preventing the spreading of fire in case of fire.

Switch Harnesses

Industrie: Kochen

The Robertshaw® 1899 and 3070 Series Switch Harnesses are used to energize the electronic spark module at the proper knob rotation. Robertshaw switch harnesses offer a reliable and easy replacement option with direct replacements for manufacturer part numbers.
Robertshaw part number 3070G0014A

Hot Surface Mini-Ignitors Series

Industrie: Heizung

Made of durable, non-porous silicon nitride, Robertshaw® Mini Ignitors provide reliable ignition in a small footprint. They offer contractors easy handling, simple installation and dependable operation. Dependable ignition in a small footprint. Constructed with unique non-porous, high-strength material.3 second heat-up time. Easy to handle and install. Trouble-free operation.
Robertshaw part number 41-602

IgnitorPro Universal Ignitors Series

Industrie: Heizung

Robertshaw® IgnitorPro Universal Ignitors are a durable and versatile product contractors can keep on hand to ensure quick, reliable repairs.
Robertshaw part number 41-803

RS-M7 Contactor Series

Branchen: Klimatisierung, Heizung

Contactors suit high power commercial HVAC applications requiring on/off switching of high power loads and control of varying voltage over thousands of motor and compressor cycles. They receive a low voltage signal from the furnace and create a magnetic field by pulling down a piece of metal connecting the higher voltage sides, causing lower voltage and current to switch a higher circuit and power fan and compressor motors. A single pole contactor has one magnetic coil for one circuit and a double pole connects two circuits with two coils.
Robertshaw part number RS-M7 - Contactor Series

41-200 Series Cooking Hot Surface Ignitors

Industrie: Kochen

The Robertshaw® 41-200 Series Hot Surface Ignitors are engineered to meet all your gas range and oven needs. These ignitors are used in the ranges of most major appliance original equipment manufactures. In addition, most ignitors are designed to match the Robertshaw bi-metal gas valves.
Robertshaw part 41-206
Nach oben scrollen